Tel： 18014002389 / 16606262180
How should the pressure sensor protection work be done? Sensors do not protect the use of it is easily affected by various factors, do not fear how to use the protection, then how to protect the pressure sensor? Although the device has stainless steel protection, do not think that this is not protection, despite the protection of stainless steel, the sensor is still very easy to damage, in order to avoid damage and damage, we must learn to protect it when using the device, once the sensor is damaged It will affect production and lead to loss in production. If you do a good job of protection, you will not be afraid of using the equipment soon. Some sensors can be used for several years or even more than ten years because of good protection.
Pressure Sensor
There are many ways to protect, among which we have to understand is that the sensor must be used in an over-range manner, so do not apply pressure that exceeds the rated pressure resistance. If the load is severe, it will cause damage, and damage will cause more problems. In the end, it will only get worse. This is something that nobody wants to see.
The environment used by the pressure sensor is also required. It cannot be used in the environment of flammable and explosive gas. It is easy to cause damage problems. This environment is inherently dangerous. If it is to be used, then choose the specific environment. In the use of the sensor also need to pay attention to a problem, the supply voltage and load short circuit, do not exceed the use of voltage range, if it is more than the use of voltage range, then what problems will arise? Cracked and burned. Therefore, in order to avoid load short-circuit or burn, we must strictly control. Finally, there is one more thing to say. This point is often forgotten. Do not mis-wiring. Correct wiring is very important. If it is wrong, it will be broken or burned.
With these points, your pressure sensor is very safe.